What is Hard Disk

What is Hard Disk? Definition Uses and Functions

May 4, 2021 by Admin

A Computer Hard Disk is also called a hard drive, HDD (Hard Disk Drive), or Fixed Disk. It is used as a secondary storage device.

They are non-volatile memory (Data is not lost when power is off) They are the cheapest and faster device that is used for data storage.

This day’s hard disk comes in huge data storage capacities such as 160 GB (GigaByte),250 GB, 500GB,1TB (TeraByte), and 2TB.

They have a rotation speed of 7200 rpm,9200 rpm (Revolution Per Minute), and 15000 rpm, and the access speed of hard drives are approx 1000 kb per second.

What is Hard Disk
What is Hard Disk
Computer Hard disk was first introduced in 1956 by IBM. 

They are the most crucial part of the computer system where all the important data has been stored almost permanently.

As when you built your new computer you install an operating system on a hard disk if it fails your computer stops responding.

Hard drives are made up of rigid materials, it has a disk-shaped platter made up of aluminum or glass and is coated with a thin layer of magnetic material the platters are hard and cannot be bent, therefore, are called fixed disk.

The Sizes of disk platters vary from 1 to 14 inches in diameter.HDD records data by magnetizing ferromagnetic material directionally to represent either 0 or 1 in a binary form.

People Are Also Reading

Table of Contents

How Hard Disk Works?

A hard drive consists of a spinning disk with heads that move over the disk and store data in tracks and sectors.

The head read and writes in a form of rings often called Tracks, which are further divided and are called sectors, which can store up to 512 bytes.

This Fixed Disk has multiple disks and is called a platter.

They are arranged on top of each other and they spin accordingly, each of the two sides is manufactured to store data.

Many Fixed Disk has more than 2 platters which results in four or six, some hard drives have 12 platters and 24 sides plus 24 heads which are used to read and write.

The aligned tracks on each side of every platter together make up a cylinder.

A Hard Drive has one head per platter with all heads mounted on a common arm, the head moves fast with vigorous speed across the disk, they are mounted on a rack which is called an actuator.

Most of the hard disk speed entirely depends upon their rotation speed before many hard disks rotate at 3600 rpm.

That was a constant speed at that time but as the technology developed many manufacturers build hard disks with more revolution speed.

Many modern-day drives spin the platters at 4200 rpm, 7200 rpm, 10,000 rpm, and 15000 rpm.

Which stands out as the reason for faster hard drive speed which can in turn access the data faster? The heads in most hard disk drives do not (and should not!) touch the platters during normal operation.

When the heads are powered off, however, in most drives they land on the platters as they stop Spinning.

While the drive is running, a very thin cushion of air keeps each head suspended a short

While the hard drive is in a working position you are advised not to touch the platters and head while in a moving position, this action can seriously damage your hard drive.

Types of hard drives?

There are mainly two types of hard drives

• IDE (Integrated Device Electronics) also known as PATA or ATA or E-IDE.

IDE Hard Disk
IDE Hard Disk

• SATA (Serial Advanced Technology Attachment) or Serial-ATA

SATA Hard Disk
SATA Hard Disk

Leave a Comment

Your email address will not be published. Required fields are marked *


Back To Top